DESCRIPTION

MULTI POXY 1305 is a filled thixotropic solvent free epoxy putty with excellent gap filling properties and is used primarily as adhesive primer for new concrete pours onto existing concrete substrates. The adhesive is fluid enough to apply over uneven surfaces with good penetration into the substrate. Sets at low temperatures and is resistant to moistureand has excellent chemical resistance.

TYPICAL APPLICATIONS

Bonding wet concrete to cured concrete, brick and steel in structural applications. Also used as a bonding adhesive for patching and repair work. 

ADVANTAGES

• Easy application 
• High bond strength 
• High resistance to water and chemicals 
• Moisture resistant
• Good penetration 

TYPICAL PROPERTIES

Yield: 1L/2L/5L 
Coverage: 3-5m2 per litre 
Application Temp: 10°C to 25 °C 
Thickness: 0.2 – 0.3mm 
Pot Life: 20 minutes 
Time to overlay: Immediate to tacky 
Full Cure: 7 Days 
Compressive Strength: 80MPa 
Tensile Strength: 7 N/mm2 
Shear Strength: 40MPa 
Cleaning: Thinners

WATCH POINTS

• Pour concrete onto the MULTI POXY 1305 while it is still wet or tacky, do not allow it to set hard or it will act as a bond breaker.
• Mix only enough that can be covered in 1 hour of application. 

DIRECTIONS FOR USE SURFACE PREPARATION

Surfaces to be clean, sound and free of deleterious substances. Remove all laitance, oil, grease, paints, mould oil or curing compound from surfaces using wire brush, bush hammer, scabbler or other plant as appropriate.

PRIMING

No priming is required. 

APPLICATION

Mix the resin and hardener together in a clean bucket. Mix only enough to be able to apply within the pot life of the epoxy. Using a PVA roller, apply a liberal coat of MULTI POXY 1305 over the surface to be primed, working the primer into the substrate well. Set the concrete into the primer while it is still wet or tacky to ensure good bond between the two substrates. 

EQUIPMENT CARE

All tools should be cleaned with thinners immediately after use. If delayed, equipment will need mechanical action to clean or be discarded. 

PACKAGING

Supplied in 1L, 2L and 5L resin and hardener kits. 

QUALITY ASSURANCE

Multi Construction Chemicals South Africa (PTY) Ltd production and testing programs comply with all local and international testing standards. MULTI EXPANSION TAPE jointing system shall be fastened in position to give continuous network with 100 mm minimum overlaps and installed in accordance with the manufacturer’s instructions. REVISION: 3.1

The information supplied is believed to be reliable. As we do not have any control over the processing or application of the product we cannot guarantee the results to be obtained.

Users assume all risks and liability resulting from the use of this product and must confirm suitability thereof by conducting their own tests.

No guarantee is expressed or implied. Liability to the replacement of faulty material.

FOR PROFESSIONAL USE ONLY.