Multi Poxy 1202

Description

MULTI POXY 1202 is an epoxy flooring screed at 2mm nominal thickness with good chemical resistant properties which gives a tough but resilient flooring system, with reasonable colour stability. Suitable for areas with excessive load bearing requirements.

Typical Applications

For use in commercial and industrial applications where high gloss and colour are required with seamless professional finishing. Used in warehouses, wineries, breweries, hangers, factory floors, engineering workshops.

Advantages

• Good colour stability
• Long lasting
• Seamless flooring
• High gloss
• Easy application
• Superb aesthetic
• High resistance to water and chemicals
• Easy to maintain

Typical Properties

Watch Points

• Substrates must be flat and smooth
• Ensure good priming to avoid blow holes or pin holes
• Spike rolling must be well done to release entrapped air
• Dust contamination on the surface must be prevented during cure

Directions for Use

Surface Preparation:

Surfaces to be clean, sound and free of deleterious substances. Remove all laitance, oil, grease, paints, mould oil or curing compound from concrete surfaces using wire brush, bush hammer, scabbler or other plant as appropriate. Ensure that the substrate is flat and smooth, repairing any holes and dips with MULTI FEATHER FINISH. Use MULTI SELF LEVELING screed if the substrate surface needs to be levelled completely. required. Friable screeds will have to be removed or re-screeded as necessary. Note any joints in order to follow through the epoxy screed where necessary.

Priming:

MULTI POXY PRIMER or a scraper coat of MULTI POXY 1202 resin and hardener (no aggregate).

Application:

Using a festo mixer or other suitable mechanical mixer, mix the resin and hardener together in a clean bucket or metal drum. When mixed, add in the aggregate until a uniform, smooth mix is achieved. Pour out the entire contents over the primed areas and spread out with a steel trowel and allow to settle. Spike roll to remove bubbling and encourage levelling. Allow 24 hours before light traffic

Equipment Care

All tools should be cleaned with thinners immediately after use. If delayed, equipment will need mechanical action to clean or be discarded.

Packing

Supplied in 5, 10 and 20LT Kits

Quality Assurance

Multi Construction Chemicals South Africa (PTY) Ltd production and testing programs comply with all local and international testing standards.

REVISION: 3.1